Products Archive - Page 13 of 17 - Wire Wizard Welding Products

Select options

Tweco® Series 4 Replacement Liners

PowerBall® Torch Liners for Tweco® Series 4 MIG Guns

Select options
Select options

Tweco® Series 5 Replacement Liners

PowerBall® Torch Liners for Tweco® Series 5 MIG Guns

Select options
Select options

Tregaskiss® / Bernard® Universal Replacement Liners

PowerBall® Torch Liners for Tregaskiss® or Bernard® MIG Guns (Rear Load)

Select options
Select options

Torch Liners for Aluminum Wire

Low friction torch liners for aluminum wire are available for PowerBall® MIG Guns as well as other welding guns. Order 15′ (4.6m) nylon liners for PowerBall® MIG Guns or others with collets that fit a .184″ (4.67 mm) outer diameter liner.

Bulk torch liner (sold by the foot) is available in extended life graphite or nylon material. May require a collet on some welding torches. Contact customer support if you are unsure of liner compatibility or require an aluminum liner for a specific torch model.

Select options
Select options

Front Loading Torch Liners

Front loading liners (6′ / 1.8m) adapt to PowerBall®, Tregaskiss®, Fronius® or Lincoln Electric® robotic MIG torches. All front loading liners require a collet adapter on the back end of the torch cable (may be reused through multiple liner change-outs).

Select options
Select options

Lincoln Electric® Replacement Liners

PowerBall® Torch Liners for Lincoln Electric® MIG Guns

Select options
Select options

Binzel® Replacement Liners

PowerBall® Torch Liners for Binzel® MIG Guns. Please inspect and verify your liner collet design prior to ordering.

Select options
Select options

Binzel® Replacement Jump Liners

PowerBall® Jump Liners for Binzel® MIG Torches. Please inspect and verify your liner collet design prior to ordering.

Select options
Select options

Panasonic® Replacement Liners

PowerBall® Torch Liners for Panasonic® MIG Guns

Select options
Select options

OTC® Replacement Liners

PowerBall® Torch Liners for OTC® MIG Guns

Select options
Select options

American Weldquip® Replacement Liners

PowerBall® Torch Liners for American Weldquip® MIG Guns

Select options
Select options

Bulk Torch Liner – 100 ft (30.5m)

Bulk PowerBall® Torch Liner – 100 ft (30.5m) Roll

Select options
Select options

Collet Adapters for Front Load Liners

Collet adapters are required for front loading torch liners and install on the back end of the torch cable (may be reused through multiple liner change-outs). Available for PowerBall®, Tregaskiss®, Fronius® or Lincoln Electric® torches.

Select options
Select options

PowerBall® Teach Tips

PowerBall® Teach Tips are available to assist with robotic welding programming. Available for 14mm, 16mm or 19mm wire stick-out length. Sold individually.

Select options
Select options

PowerBall® 300 Amp MIG Gun for Ferrous Wire
Configure your welding gun from the available options. All new PowerBall® MIG Guns for steel/ferrous wire ship with the following standard pre-installed options:
- WTP-ELN-62T-THRC 5/8″ recessed heavy duty copper nozzle
- WTP-045-PB-2 – .045″ (1.2mm) contact tip (9mm O.D.)
- PowerBall® Torch Liner for 0.045-1/16″ (1.2-1.6 mm) steel wire
- Click here to see the full line of PowerBall® Consumables
Select options
Select options

PowerBall® 300 Amp MIG Gun for Non-ferrous Wire
Configure your welding gun from the available options. All new PowerBall® MIG Guns for aluminum/non-ferrous wire ship with the following standard pre-installed options:
- WTP-ELN-62T-THRC 5/8″ recessed heavy duty copper nozzle
- WTP-3/64A-PB-2 3/64″ (1.2 mm) contact tip (9 mm O.D.)
- PowerBall® Polymer Torch Liner for 0.045-1/16″ (1.2-1.6 mm) aluminum/non-ferrous wire
- Click here to see the full line of PowerBall® Consumables
Select options