-
PowerBall® 300 Amp MIG Gun for Ferrous Wire
Configure your welding gun from the available options. All new PowerBall® MIG Guns for steel/ferrous wire ship with the following standard pre-installed options:
- WTP-ELN-62T-THRC 5/8″ recessed heavy duty copper nozzle
- WTP-045-PB-2 – .045″ (1.2mm) contact tip (9mm O.D.)
- PowerBall® Torch Liner for 0.045-1/16″ (1.2-1.6 mm) steel wire
- Click here to see the full line of PowerBall® Consumables
-
PowerBall® 300 Amp MIG Gun for Non-ferrous Wire
Configure your welding gun from the available options. All new PowerBall® MIG Guns for aluminum/non-ferrous wire ship with the following standard pre-installed options:
- WTP-ELN-62T-THRC 5/8″ recessed heavy duty copper nozzle
- WTP-3/64A-PB-2 3/64″ (1.2 mm) contact tip (9 mm O.D.)
- PowerBall® Polymer Torch Liner for 0.045-1/16″ (1.2-1.6 mm) aluminum/non-ferrous wire
- Click here to see the full line of PowerBall® Consumables
-
PowerBall® 400 Amp MIG Gun for Ferrous Wire
Configure your welding gun from the available options. All new PowerBall® MIG Guns for steel/ferrous wire ship with the following standard pre-installed options:
- WTP-ELN-62T-THRC 5/8″ recessed heavy duty copper nozzle
- WTP-045-PB-2 – .045″ (1.2mm) contact tip (9mm O.D.)
- PowerBall® Torch Liner for 0.045-1/16″ (1.2-1.6 mm) steel wire
- Click here to see the full line of PowerBall® Consumables
-
PowerBall® 400 Amp MIG Gun for Non-ferrous Wire
Configure your welding gun from the available options. All new PowerBall® MIG Guns for aluminum/non-ferrous wire ship with the following standard pre-installed options:
- WTP-ELN-62T-THRC 5/8″ recessed heavy duty copper nozzle
- WTP-3/64A-PB-2 3/64″ (1.2 mm) contact tip (9 mm O.D.)
- PowerBall® Polymer Torch Liner for 0.045-1/16″ (1.2-1.6 mm) aluminum/non-ferrous wire
- Click here to see the full line of PowerBall® Consumables
-
PowerBall® 500 Amp MIG Gun for Non-ferrous Wire
Configure your welding gun from the available options. All new PowerBall® MIG Guns for aluminum/non-ferrous wire ship with the following standard pre-installed options:
- WTP-ELN-62T-THRC 5/8″ recessed heavy duty copper nozzle
- WTP-3/64A-PB-2 3/64″ (1.2 mm) contact tip (9 mm O.D.)
- PowerBall® Polymer Torch Liner for 0.045-1/16″ (1.2-1.6 mm) aluminum/non-ferrous wire
- Click here to see the full line of PowerBall® Consumables
-
PowerBall® 500 Amp MIG Gun for Ferrous Wire
Configure your welding gun from the available options. All new PowerBall® MIG Guns for steel/ferrous wire ship with the following standard pre-installed options:
- WTP-ELN-62T-THRC 5/8″ recessed heavy duty copper nozzle
- WTP-045-PB-2 – .045″ (1.2mm) contact tip (9mm O.D.)
- PowerBall® Torch Liner for 0.045-1/16″ (1.2-1.6 mm) steel wire
- Click here to see the full line of PowerBall® Consumables
-
Wire Feeder Extension Kit
Due to its unique design, the PowerBall® MIG Gun power cable may interfere with some wire feeder housings. To overcome this, simply install the optional extension kit between the feeder adapter and the rear connector on the torch to extend the feeder adapter further away from the wire feeder housing.
-
Heat Spring for PowerBall® MIG Guns
The PowerBall® Heat Spring is designed to reduce heat exposure in high heat and long duty cycle applications, allowing operators to handle the neck. It creates a pocket of air around the neck for better heat dissipation than solutions that cover the entire neck. Easily installed by removing the insulator and sliding over the torch neck. Compatible with long and extra long necks for PowerBall® MIG guns.
-
PowerBall® Fixed Automation Torch
Configure your fixed automation welding torch from the available options. All new PowerBall® MIG Torches for ship with the following standard options unless otherwise noted when ordering:
- WTP-ELN-62T-THRC 5/8″ recessed heavy duty copper nozzle
- PowerBall® 9mm dia. Contact Tip & Diffuser, based on wire size/type
- PowerBall® Torch Liner, based on wire size/type
- Click here to see the full line of PowerBall® Consumables
Fixed automation torch mount shown in photo sold separately.
-
Fixed Automation Torch Mount
This heavy duty fixed automation torch mount fits PowerBall® Fixed Automation Torches as well as torches made by other OEM manufacturers. Allows directional adjustment and includes insulated mounting plate. Fits 3/4″ torch neck diameter.
|
|
