MIG Wire Delivery Equipment

  • Wire Retract Kit

    The Wire Retract Kit serves as an automated forward/reverse control for the Wire Pilot® Feed Assist and also as an emergency shutoff. The solenoid allows the wire feed to be reversed when necessary and shuts down the motor immediately in case of an emergency. Compatible with both Feed Assist models.

  • Solenoid Kit (24V)

    The 24V Solenoid Kit serves as an automated electronic shutdown for the Wire Pilot® Feed Assist and also as an emergency shutoff. The solenoid prevents the loss of air pressure when the motor is not in use and shuts down the motor immediately in case of an emergency. Compatible with both Feed Assist models.

  • Replacement Filter-Regulators

    A filter/regulator is included with the Wire Pilot® Feed Assist oil-free model (PFA-LM-15), and a filter/regulator/lubricator is included with the oiled model (PFA-LM). Order replacement if your current filter/regulator has been damaged or is inoperative.

  • Non-Stop® 2 & 4 Station Systems

    The Non-Stop® Wire Dispensing System features an innovative process that joins the end wire from the current drum in use with the start wire of a new full drum, eliminating downtime for wire changeover. Both butt-welding and flash removal operations take only seconds and the two wire ends may be joined during the welding cycle. Butt Welder Docking Station shown in photo sold separately.

  • Butt Welder Docking Station

    The Butt Welder Docking Station features all the required tools for butt welding wire ends together with the Non-Stop® Wire Dispensing System. The unit features a resistance butt welder (110v or 220v), wire parters for cutting flush wire ends, a wire sizer for removing the burr in the welded joint and a wire gage block for checking the wire diameter to ensure a smooth wire feed. Compatible with solid or cored ferrous metal wires up to .078 (2mm) in diameter.

  • Portable Butt Welder

    The Portable Butt Welder for the Non-Stop® Wire Dispensing System is designed for welding up to .078 (2mm) diameter wire ends together. 110v or 220 v US and European models available. Welds both solid and cored ferrous wires. Not compatible with non-ferrous wires, such as aluminum.

    Note: Wire Parters and Wire Sizer tool highly recommended for clean and smooth wire joints.

  • Wire Parters

    Wire Parters will cut flat wire ends in order to butt weld wires together properly when using the Non-Stop® Wire Dispensing System. Note: Wire Parters included on Butt Welder Docking Station.

  • Wire Sizer

    The Wire Sizer for the Non-Stop® Wire Dispensing System is designed to quickly and cleanly size the butt welded wire joint by removing the burr in the weld. Simply insert the wire, clamp down and pull the lever to remove the burr for smooth wire feeding. Wire Sizers are available for common solid and cored wire sizes up to .078″ (2mm). Replacement dies available, contact customer service for details. Note: Wire Sizer included on Butt Welder Docking Station.

  • Wire Gage Block

    Use the Wire Gage Block to ensure cleaned/sized wire joints will feed smoothly when using the Non-Stop® Wire Dispensing System. The block includes slots for .035” (0.9mm), .045” (1.2mm), .052” (1.3mm) and .062” (1.6mm) wire. Note: Wire Gage Block included on Butt Welder Docking Station.

  • Guide Module Mounting Adapters

    Two adapter options are available for mounting Wire Guide Modules on top of the Non-Stop® Wire System: The rigid adapter mounts the Modules in a fixed position, and the swivel adapter allows 360° rotation.

  • Wire Feed Assist Mounting Adapter

    Adapter mounts Wire Pilot® Pneumatic Feed Assist (oil-less model) to the top connection point on the Non-Stop® Wire System stand. Includes insulating liner.

  • A-1LN Inlet Guides

    • Provides trouble-free interface of connections
    • Available in delrin, aluminum or steel for large wire
    • 1/4″ NPT Female threaded to fit A-4-ST, A-4-ST-I or A-4 quick disconnects

    Compatible with the following wire feeders:

    • Lincoln Electric®
  • A-1M Inlet Guide

    • Provides trouble-free interface of connections
    • 1/4″ NPT Female threaded to fit A-4-ST, A-4-ST-I or A-4 quick disconnects

    Compatible with the following wire feeders:

    • Miller®
  • PAWFS-12 Inlet Guides

    • Provides trouble-free interface of connections
    • Order PAWFS-12 for steel wire, PAWFS-12-1 (includes 3/16″ I.D.) with the A-4L-H liner for non-ferrous/aluminum wire
    • Connects to 1/4″ NPT Male threaded to fit A-3 quick disconnect (1/4 NPT-F) or A-16F-4 fitting (1/4 NPT-M / EC-4-R conduit fitting)

    Compatible with the following products:

    • Wire Feed Sensor (WC-1-WS-18)
    • Miller® 75 Feeder
  • A-2E Inlet Guide

    • Provides trouble-free interface of connections
    • 1/4″ NPT Female threaded to fit A-4-ST, A-4-ST-I or A-4 quick disconnects

    Compatible with the following wire feeders:

    • ESAB® 4-48
  • A-1E Inlet Guide

    • Provides trouble-free interface of connections
    • 1/4″ NPT Female threaded to fit A-4-ST, A-4-ST-I or A-4 quick disconnects

    Compatible with the following wire feeders:

    • ESAB®